AtTiny 2313 parts list

From XinCheJian
Jump to navigation Jump to search

Complete SwarmRobot AtTiny2313 main/base PCB AND four IR receiver LEDs connected “dead bug” style

Photo Project Quantity Part Remarks Distributor
AtTiny2313-800x.JPG
1 AtTiny2313-PU Digikey [link] 10.28 10.28
L293D-800x.JPG
1 L293D h-Bridge Chip Taobao [link] 2.80 2.80
LEDs 3 colours-800x.JPG
2 LED 3mm Red *OPTIONAL (Front skid can be replaced with bent wire) 1xPWR_LED1 LED, 1xUsed as Front wheel/skid Taobao [link] 0.03 0.06
Header male DIL-800x.JPG
1 3x2 2.54mm Male Dual row header (DIL) *OPTIONAL ICSP1 CONN_3X2 Taobao link 0.10 0.10
Header male SIL closeup-800x.JPG
1 2x1 2.54mm Male Single row header (SIL) *OPTIONAL - can all be wired directly. M1, M2, PWR_IN1 Taobao link 0.10 0.10
Header female SIL x8 17-800x.JPG
2 8x1 2.54mm Female Single row socket (SIL) *OPTIONAL can wire directly Taobao link 0.10 0.20
Switch push button PCB mount on-off-800x.JPG
1 SPST PCB mount *OPTIONAL - can just plug battery in/out! PWR_SWITCH1 SWITCH_INV Taobao [link] 0.15 0.15
Resistors 200ohm x3-800x.JPG
3 200R 1/4W Resistor *OPTIONAL R1, 2, 3 Taobao link 0.01 0.03
LEDs 3 colours-800x.JPG
1 LED 3mm Blue *Optional Rx Taobao [link] 0.05 0.05
LEDs 3 colours-800x.JPG
1 LED 3mm Yellow *Optional Tx Recycled - Scavenged - item [link] 0.05 0.05
Bottle cap wheels-800x.JPG
2 Wheel Recycled - Scavenged - item link 0.00 0.00
SwarmRobot AtTiny2313 PCB.JPG
1 SwarmRobots PCB 2012-08-09 *OPTIONAL - can use breadboard or deadbug wiring! Taobao [link] 10.00 10.00
Motor 928-800x.JPG
2 Motor J928 There many similar motors with different part numbers! Taobao [link] 3.00 6.00
Screws to mount wheels-800x.JPG
2 screw - tiny to attach wheels to motors Recycled - Scavenged - item link 0.00 0.00
Hot melt glue.JPG
1 Hot melt glue 1/20th of a stick? to attach motors and??? Taobao [link] 0.03 0.03
Hookup wire.JPG
1 Hookup wire *OPTIONAL about 100mm for motors and maybe for battery, or use two strands of Rainbow cable Recycled - Scavenged - item n/a 0.00 0.00
IC socket 16pin-800x.JPG
3 16pin DIP IC socket *Optional Ð can solder IC directly Taobao [link] 0.18 0.54
Battery 3.7V rechargable-800x.JPG
1 Lithium 180mA 3.7V Taobao [link] 8.00 8.00
Battery charger USB-800x.JPG
1 USB lithium battery charger *Optional - Do not need 1 for every SwarmBot Taobao [link] 2.00 2.00
USB ASP ISP -jump ON.JPG
1 ISP Programmer Taobao [link] 18.00 18.00
IC socket 20pin-800x.JPG
1 20pin DIP IC socket *Optional Ð can solder IC directly Taobao [link] 0.11 0.11
1838B IR receiver LED x4-800x.JPG
4 1838B or TSOP1838B or VS1838B Taobao [link] 0.45 1.80
Hookup wire.JPG
1 Hookup wire about 100-200mm, more if LEDs used Recycled - Scavenged - item n/a 0.00 0.00
Remote control.JPG
1 Remote control *OPTIONAL - use 1 for each LED Recycled - Scavenged - item n/a 0.00 0.00
xe.com exchange rate on 9/9/12 0.157637 Total RMB 60.30
These parts are for the complete main/base PCB AND four IR receiver LEDs connected 'dead bug' style Total US$ 9.51

2012-09-18:- Edited expired part links, so they now work, but still point to same part!


All Xinchejian SwarmRobot AFRON wiki pages